INON D-200 Strobe [Options]

The Strobe Dome Filter SOFT installed on the Z-330.

This filter does not widen strobe beam angle and cut strobe output at "approx.0.3EV." underwater. Attach this filter when you prefer soft flash light" or want to protect front dome of the strobe.

[Compatible Strobe]
Z-330, D-200 (packaged in the Z-330/D-200)

[Effect on strobe power]
-0.3 EV.

The Strobe Dome Filter ND installed on the Z-330.

An ND filter to step down strobe output at -4EV.

[Compatible Strobe]
Z-330, D-200

[Effect on strobe power]
-4 EV.

The Strobe Dome Filter [4900K] installed on the Z-330.

A color filter to warm native color temperature to 4900K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4900K can have richer blue water back ground with natural color subject illuminated by a strobe.

[Compatible Strobe]
Z-330, D-200

[Color temperature]
4900K

The Strobe Dome Filter [4600K] installed on the Z-330.

A color filter to warm native color temperature to 4600K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4600K can have richer blue water back ground with natural color subject illuminated by a strobe.

[Compatible Strobe]
Z-330, D-200

[Color temperature]
4600K

The INON Snoot Set for Z-330/D-200 is an accessory for the INON "Z-330", "D-200" to change beam angle. The various combination of packaged parts supports 7 different beam coverage with the following effects [To block extra diffused light eliminating backscatter] / [To highlight a subject by illuminating the subject only ] / [To give a spotlight effect on a subject etc.]
The Rubber Hood is securely attached on a compatible strobe via supplied dedicated aluminum sleeve which is screwed on the Strobe Light Shade mount thread on the strobe.

Optional kit to use [Wireless Connection]. This package includes Mirror Units (strobe) and Camera Mirror, stickers to reliably transmit built-in flash light to the strobe in S-TTL Auto mode.

*This Wireless connector kit is included in the S-2000 strobe package. But it is sold separately from the Z-330 strobe, D-200, Z-240 Type4 strobe and the D-2000 Type4 strobe.

INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.

A set of an Optical D Cable Type L with Single Hole Rubber Bush Type L and Double Hole Rubber Bush Body. The rubber bush is directly linked with an underwater housing equipped with a cable adapter of 7 mm/0.3 in. diameter.

INON [Optical D Cable Type L / Cap Set] is a key component to reliably trigger an external strobe in synch with built-in flash light.

*Use correct Optical D Cable exclusively designed for each camera system.

TTL Optical Slave Cable S Type L

JAN code : 4562121434363

An optical slave cable exclusively used for slave connection between Z-330 or TTL strobe with TTL Sensor, and compatible strobes from other manufacturers or master strobes, such as INON Z-22.

S: Compatible master strobe
Nikon SB‐105, Sea&Sea YS60TTL, YS90TTL Duo, YS120TTL Duo

L: Compatible master strobe
INON Z-22, Nikon SB-104, Sea&Sea YS350TTL/Pro, YS300TTL/S

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.

A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.

"Z Joint" is attached on [YS Adapter compatible arm] including "Grip Base D4" / "Shoe Base" etc. to set up compact strobe system and equipping with "YS Adapter" enables to attach on various strobe arms as like "Z Adapter".

A set of Quick Holder Z and Quick Base S to use INON quick release system for INON Z-330, D-200, S-2000, Z-240, D-2000 strobes.

Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV"is necessary to use this product.

Optional product to attach one or two INON LF series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II"is necessary to use this product.

A Shoe Base installing a strobe on an accessory show of an underwater housing.

A multi-purpose product to provide strobe arm function to hold compatible INON external strobe, a base-stay function to connect compatible housing / protector and a strobe arm, and grip / holder function to hold a whole system.

A cover to protect front dome lens of INON Z-330 / D-200 strobe. Designed to fit to the strobe with “Strobe Light Shade” being attached. Usable underwater as the cover is made of neoprene as same as wetsuits. Also usable for an INON wide lens attached with a lens hood.

set-up image

A cover to protect front dome lens of INON Z-330 / D-200 strobe. Designed to fit to the strobe with “Strobe Light Shade” being attached. Usable underwater as the cover is made of neoprene as same as wetsuits. Also usable for an INON wide lens attached with a lens hood.

A strobe cover made from neoprene as same as wet-suits for underwater use. This cover protects strobe from accidental damage during diving as well as transportation by its cushioned material. Two slits on both sides are designed for effective radiation.

Replacement O-Ring for the D-200/S-2000/D-2000.
INON yellow O-Rings contain lubricant in the O-Ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-Ring.

Special grease formulated to match INON yellow O-Rings. Can also be used with conventional black O-Rings.

Strobe Dome Filter SOFT

Strobe Dome Filter ND

Strobe Dome Filter [4900K]

Strobe Dome Filter [4600K]

Snoot Set for Z-330/D-200

Wireless Connection Kit

Optical D Cable Type L

Optical D Cable Type L Rubber Bush Set 2

Optical D cable Type L / Cap Set

TTL Optical Slave Cable S Type L

TTL Optical Slave Cable L Type L

Z Adapter MV

Z Adapter II

Direct Base III

Z Joint

Quick Holder Set S-Z

Strobe Light Holder LE

Strobe Light Holder LF

Shoe Base M6

Grip Base D4 set

Front Cover 110

Strobe Cover D/Z

Battery Box O-ring

INON Grease