Strobe Options
Strobe Dome Filter
Difuser for S-2000
Attaching this diffusers to "S-2000" increases beam angle [105°x95°] to [110°x110°circular], and makes quality of light and shadows soften.
"Blue Diffuser" compensate / ease yellowish / reddish compensation characteristic mainly by Canon digital camera.
[Compatible Strobe]
Diffuser 2
Attaching these diffusers to "Z-240" / "D-2000" increases beam angle from 100 to 110°and makes quality of light and shadows softer.
Left: -0.5 Blue Diffuser 2 (External Auto)
Right: -0.5 White Diffuser 2 (External Auto)
[Compatible Strobe]
Snoot Set for Z-330/D-200
JAN code : 4562121438996
The INON Snoot Set for Z-330/D-200 is an accessory for the INON Z-330, D-200 to change beam angle. The various combinations of packaged parts deliver 7 different beam coverage with the following sophisticated effects
・To block extra diffused light eliminating backscatter
・To highlight a subject by illuminating the subject only
・To give a spotlight effect on a subject etc.
[Compatible Strobe]
Snoot Set for S-2000
JAN code : 4562121435834
[Compatible Strobe]
Optical D Cable Type L
INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.
[Compatible Strobe]
Optical D Cable Type L Rubber Bush Set 2
A set of an Optical D Cable Type L with Single Hole Rubber Bush Type L and Double Hole Rubber Bush Body. The rubber bush is directly linked with an underwater housing equipped with a cable adapter of 7 mm/0.3 in. diameter.
[Compatible Strobe]
Optical D Cable Type L / Cap Set
INON "Optical D Cable Type L / Cap Set" is a key component to reliably trigger an external strobe in synch with built-in flash light.
*Use correct Optical D Cable exclusively designed for each camera system.
[Compatible Strobe]
Optical D Slave Cable III Type L
JAN code : 4562121434936
Dedicated Optical D Slave cable to connect the "S-2000" and compatible strobe in [Optical D Slave Cable Connection]
[Compatible Strobe]
Optical D Slave Cable II Type L
JAN code : 4562121434929
Dedicated Optical D Slave cable to connect the "Z-240" / "D-2000" and compatible strobe in [Optical D Slave Cable Connection].
[Compatible Strobe]
Z Adapter MV
JAN code : 4562121436527
An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.
[Compatible Strobe]
Z Adapter II
JAN code : 4562121437418
An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.
[Compatible Strobe]
Direct Base III
JAN code : 4562121436541
A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.
[Compatible Strobe]
Z Joint
JAN code : 4562121433571
[Compatible Strobe]
Quick Holder Set S-Z
JAN code : 4562121439412
A set of Quick Holder Z and Quick Base S to use INON quick release system for INON Z-330, D-200, S-2000, Z-240, D-2000 strobes.
【Compatible Strobe】
Strobe Light Holder LE
JAN code : 4562121435568
Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV" is necessary to use this product.
[Compatible Strobe]
Strobe Light Holder LF
JAN code : 4562121437715
Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II" is necessary to use this product.
[Compatible Strobe]
Shoe Base M6
JAN code : 4562121438477
A Shoe Base installing a strobe on an accessory show of an underwater housing.
[Compatible Strobe]
Front Cover 110
JAN code：4562121438989
set-up image
【Compatible Strobe】
set-up image
A cover to protect front dome lens of INON Z-330 / D-200 strobe. Designed to fit to the strobe with “Strobe Light Shade” being attached. Usable underwater as the cover is made of neoprene as same as wetsuits. Also usable for an INON wide lens attached with a lens hood.
【Compatible Strobe】
Strobe Cover D/Z
JAN code : 4562121433861
[Compatible Strobe]
Strobe Light Shade
JAN code : 4562121438668
A rotatable partial light shade to prevent marine snow, flare, ghosting by not exposing suspended particles or not let strobe light shining a lens. The inner surface is attached with reflective sticker to bounce strobe light for creative lighting.
[Compatible Strobe]
Spare O-ring Set (for Z-240 Battery Box and Synch Connector Cap)
INON yellow O-rings contain lubricant in the o-ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-ring
[Compatible Strobe]
Battery Box O-ring
Replacement O-Ring for the S-2000/D-200/D-2000.
INON yellow O-Rings contain lubricant in the O-Ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-Ring.
[Compatible Strobe]
INON Grease
Special grease formulated to match INON yellow O-rings. Can also be used with conventional black O-rings.
[Compatible Strobe]
Manual Sticker D/Z
glance with intuitive design and numbers. It is easy to read in dark area or night dive thanks to luminous paint.
*Original indications of External Auto mode (green numbers) and S-TTL Auto mode (yellow arcs) become invisible by this sticker.
[Compatible Strobe]
A sticker attached around the EV Control Switch to enhance reading of power setting when shooing either D-2000 series or Z-240 strobe in Manual mode. The sticker provides current power setting indication at a
glance with intuitive design and numbers. It is easy to read in dark area or night dive thanks to luminous paint.
*Original indications of External Auto mode (green numbers) and S-TTL Auto mode (yellow arcs) become invisible by this sticker.
[Compatible Strobe]
