Wireless Connection Kit

JAN code : 4562121434240

* "Clear Photo System" is not usable for "wireless connection" using this product.
* For "Wireless Connection", it is essential to adjust "Mirror Unit (strobe)" position properly whenever changing strobe position to ensure proper operation.

[Compatible Table]
 

 
<Glossary>
 Wireless: Indicates compatibility with each strobe's wireless function.
　OK: Compatible. All functions work
　PU: Prtially Useable. Refer to footnotes *for detail.
　X: Optical cable connection is recommended since wireless connection may not work properly.
 
 Camera Mirror: Indicates which Camera Mirror to use. Camera mirrors are included in a Wireless Connection Kit.

(*1) S-TTL Auto mode gets less accurate at F2.8 or larger aperture setting.
(*2) Remove housing diffuser panel (translucent) then attach a Camera Mirror on a transparent plate.
(*3) Remove housing diffuser panel (translucent) and transparent panel then attach a Camera Mirror directly on surface of an underwater housing.
(*4) If your housing has pre-installed diffuser or flash diffuser panel, remove it and attach a Camera Mirror directly on the housing.
(*5) Use Optical Cable Connection for S-TTL Auto mode since housing design does not accept a Camera Mirror in front of the built-in flash for Wireless Connection.Use [Manual mode] or [External Auto mode] (Z-240/D-2000), or connect a strobe via fiber optics.
(*6) Attach a Camera Mirror directly on a housing not on the pre-installed diffuser panel (translucent) or transparent panel. Not necessary to remove the diffuser panel (translucent) or transparent panel.
(*7) Wireless Connection is not usable since the Mount Unit of compatible Mount Base blocks reflecting light from a Camera Mirror. Use Optical Cable Connection.
(*8) Depending on shooting situation, S-TTL Auto mode could bet less accurate. Use [Manual mode] or [External Auto mode] (Z-240/D-2000) in such a case.
(*9) A Camera Mirror will touch on the Mount Unit of compatible Mount Base without any practical problem.
(*10) S-TTL Auto is not usable since the camera is non-preflash type. Use [Manual mode] or [External Auto mode] (Z-240/D-2000).
(*11) Use Optical Cable Connection since compatible AD Mount Base completely covers built-in flash and a Camera Mirror can not be attached.
(*12) A Mount Base with pre-installed diffuser panel needs to remove the panel to attach a Camera Mirror on an underwater housing.
(*13) S-TTL Auto works without any problem. More than -1.5 EV. setting in Manual mode and actual flash output beyond -1.5 EV. on External Auto mode is not usable. This is because FE360 built-in flash characteristic where time-lag between [pre-flash] and [main flash] is beyond Advanced Cancel Circuit control range and always has to set it to OFF.
(*14) The Shoe Base can be attached only via optional compatible Mount Base.
(*15) The S-TTL Auto mode works fine when using aperture range F9-F16 in shooting mode [M (Manual mode)] / [A (Aperture priority mode)]. Except those settings, [Manual mode] or [External Auto mode] (Z-240/D-2000) would be recommended since S-TTL Auto mode may be less accurate.
(*16) S-TTL Auto is not usable for wireless connection since Mount Base prevents Camera Mirror from attaching on ideal location of a housing. Use [Manual mode] or [External Auto mode] (Z-240/D-2000), or connect a storobe via filber optics.
(*17) Not necessary to attach a Camera Mirror on a housing.
(*18) S-TTL Auto is not usable for wireless connection as housing structure does not allow to have Camera Mirror on it. Use [Manual mode] or [External Auto mode] (Z-240/D-2000), or connect a strobe via fiber optics.
(*19) S-TTL Auto accuracy may degrade depending on shooting condition. if this is the case, use [Manual mode] or [External Auto mode] (Z-240/D-2000), or connect a strobe via fiber optics.
(*20) Attach a Camera Mirror directly on a housing after removing translucent panel (which consists of flash diffuser), boxing plate (where the flash diffuser is mounted) together with stick parts. Refer to a user manual of Wireless Connection Kit for detail.
(*21) Attach a Camera Mirror on housing diffuser panel (translucent white).
(*22) Wireless connection is not usable as the built-in flash light creates shadow underneath of a subject. Use optical cable connection.
(*23) Optional "Accessory Shoe Spacer for Canon" is required to mount the Shoe Base on the housing.
(*24) Wireless connection is not usable as the housing obstructs optical signal transmission. Use optical cable connection.
(*25) Except shooting with [M Manual] mode, S-TTL Auto accuracy may degrade to cause underexposure. If this is the case, set camera's flash compensation value between +1.0 EV and +1.3 EV.