M67 Lens Holder
M67 Lens Holder Shoe Base
JAN/EAN code : 4570018120398
An M67 lens holder directly attached on a housing accessory shoe enabling to use a lens holder without arm making rig size compact.
[Compatible Shoe Base]
Shoe Base Spacer
Shoe Base Adapter D4
Shoe Base Adapter X-2
The accessory shoe of underwater housing.(*1)
(*1) Not guaranteed to fit on the accessory shoe of all housings
M67 Lens Holder for Float Arm
JAN/EAN code : 4562121434127
An option to hold M67 series / 28M67 series attachment lens underwater. Easy to carry an attachment lens underwater and makes lens handling easy. A lens holder is attached on an arm or M5 Joint by screwing through the center [hole] of the Lens Holder.
Weight：50 g/1.7 oz(air)/25 g/0.8 oz(underwater)
[Compatible Arm]
Float Arm S / M / ML
Mega Float Arm S / M
Mega Float Tube S / M ＋ Carbon Telescopic Arm SS / S / M / L
M5 Joint ＋ Stick Arm SS-T / S-T / M-T / L
M5 Joint ＋ Multi Ball Arm S / ML / L / LL / XL
M67 Lens Holder S
JAN/EAN code : 4562121431713
A lens holder attached on an arm, etc. to carry M67 series/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder Base of this product.
Weight：62 g/2.1 oz(air)/31 g/1.0 oz(underwater)
[Compatible Arm]
Arm SS / S / M / L
YS Arm MS / M
M67 Lens Holder W
JAN/EAN code : 4562121431720
A lens holder attached on an arm etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like " M67 Lens Holder for Float Arm " as well.
Weight：62 g/2.1 oz(air)/31 g/1.0 oz(underwater)
106 g/3.7 oz(air)/60 g/2.1 oz(underwater)
[Compatible Arm/Base]
Use Lens Holder [screw] and Lens Holder [hole] or Lens Holder Base to sandwich the compatible arm.
Arm SS / S / M / L
YS Arm MS / M
Only use Lens Holder [hole] being screwed on.
Float Arm S / M / ML
Mega Float Arm S / M
Mega Float Tube S / M
M5 Joint + Stick Arm SS-T / S-T / M-T / L
M5 Joint + Multi Ball Arm ML / L / LL / XL
Lens Hood
Lens Hood III
JAN/EAN code : 4570018120251
A lens hood for “UWL-H100”, ”UWL-95 C24” and ”UWL-95S XD” wide lenses. The hood blocks unnecessary ambient light in back-lit condition etc. to prevent ghosting/flare and also protects lens surface from accidental damage.
No vignetting at zoom wide end both underwater and on land.
Confirmed camera/housing
Sony [MPK-URX100A] + Olympus [PT-059], [PT-058], [PT-056]
Other camera/housing combinations have not been tested, so please note that vignetting may occur depending on the lens and housing lens surface conditions.
Outer diameter : φ114 mm/4.4 in.
Length : 53 mm/2.0 in
Weight : [Air] 8 g/0.2 oz, [Underwater] approx. 54 g/1.9 oz
Not usable when using “Dome Lens Unit III”.
Dome Lens Unit
Dome Lens Unit IIIG (Multi-coating optical glass)
JAN/EAN code : 4562121439726
Dome Lens Unit IIIA (Multi-coating high transparency optical acrylic)
JAN/EAN code : 4562121439719
Optional dome lens enabling "wider" imaging and "closer" focusing distance underwater.
*Not usable standalone.
Cover/Pouch
Front Cover 110
JAN/EAN code : 4562121438989
A cover designed for wide lens fitted with a lens hood. This cover protect lens surface when not in use as the cover is made of elastic neoprene material.
UWL-100 Neoprene Carry Pouch
JAN/EAN code : 4562121431645
A carry pouch made of neoprene which is used for wet suit and can be brought to underwater. It is recommended to put attachment lens in this carry pouch whenever not in use to prevent accidental damage.
*Not usable when Lens Hood III or Dome Lens Unit III is installed.
Screw mount
M52 Screw Ring for UWL-95S
JAN/EAN code : 4570018120725
Threaded mount for "UWL-95S M52".
Replacing the original mount of "UWL-95S M67" or "UWL-95S XD" with this part converts to "UWL-95S M52".
*Please note that the original rear lens cap is not usable. M52 compatible lens cap is available separately.
M67 Screw Ring for UWL-95S
JAN/EAN code : 4570018120718
Threaded mount for "UWL-95S M67".
Replacing the original mount of "UWL-95S M52" or "UWL-95S XD" with this part converts to "UWL-95S M67".
*Please note that the original rear lens cap is not usable. M67 compatible lens cap is available separately.
XD Male Bayonet for UWL-95S
Bayonet mount for "UWL-95S XD".
Replacing the original mount of "UWL-95S M52" or "UWL-95S M67" with this part converts to "UWL-95S XD".
*Please note that the original rear lens cap is not usable. XD compatible lens cap is available separately.