Dome Lens Unit II for UWL-H100
JAN code : 4562121436206
The "Dome Lens Unit II for UWL-H100" is a dedicated super dome option for "UWL-H100 28LD" and "UWL-H100 28M67" to increase underwater maximum view angle from their original 100.8°to144.8°. The Dome Lens Unit II enables you to "take more wide image" and "get more closer to subject", which is useful not only to take wide images of underwater landscape but to shoot in poor visibility as well.
Outer diameter: Φ132.4mm (5.2in)
Length: [standalone] 48.2mm (1.9in)
: [with UWL-H100 28M67] 72.7mm (2.9in)
Weight: [standalone] 470g (16.5oz) [air]
: [with UWL-H100 28M67] approx.525g (18.5oz) [underwater]
Lens Hood II
JAN code : 4562121439702
Set-up image
A lens hood specifically designed for series of UWL-H100 Wide Conversion Lenses. The hood position is adjustable to accommodate with screw mount UWL-H100 28M67 Type1/Type2 as well as UWL-H100 28LD. The hood blocks unnecessary ambient light in back-lit condition etc. to prevent ghost/flare and also protects lens surface from accidental damage.
Outer diameter: φ114mm (4.5in)
Length: [standalone] 53mm (2.1in)
: [with UWL-H100 28LD] 73mm (2.9in)
: [with UWL-H100 28M67] 73mm (2.9in)
Weight: [standalone] 54g (1.9oz) [air] / approx.8g (0.3oz) [underwater]
: [with UWL-H100 28LD] 584g (20.6oz) [air] / approx.334g (11.8oz) [underwater]
: [with UWL-H100 28M67 Type1] 609g (21.5oz) [air] / approx.353g (12.5oz) [underwater]
: [with UWL-H100 28M67 Type2] 610g (21.5oz) [air] / approx.354g (12.5oz) [underwater]
*Not usable together with "Dome Lens Unit II for UWL-H100" .
Step-up Ring 52-67
JAN code : 4562121437821
A step-up ring to install M67 series / 28M67 series attachment lens on a compatible waterproof protector which is equipped with 52mm lens mount.
M67 Lens Holder for Float Arm
JAN code : 4562121434127
A lens holder attached on Float Arm/Mega Float Arm or on the M5 Joint installed on Stick Arm/Multi Ball Arm to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater.
Click here for detailM67 Lens Holder S
JAN code : 4562121431713
A lens holder attached on an Arm, D Holder Extension Bar etc. to carry M67 series/28M67 series attachment lens to help comfortable multiple lens handling underwater.
Click here for detailM67 Lens Holder W
JAN code : 4562121431720
A lens holder attached on an Arm, D Holder Extension Bar etc. to carry M67/28M67 series attachment lens. Compatible product is sandwiched between Lens Holder [screw] and Lens Holder [hole], or Lens Holder [screw] and Lens Holder Base of this product. The Lens Holder [hole] is usable as like M67 Lens Holder for Float Arm as well.
Click here for detail
Front Cover 110
JAN code: 4562121438989
A cover designed for an INON wide lens attached with a lens hood. This cover protect lens surface when not in use as the cover is made of cushioning neoprene material.
UWL-100 Neoprene Carry Pouch
JAN code : 4562121431645
Carry pouch is made of neoprene which is used for wet suit and can bring to underwater. It is recommended to keep attachment lens in this carry pouch until just before you use the lens to prevent accidental damage.
M67 Screw Ring Set for UWL-H100 28M67 Type1 [service part]
Set of a lens mount of the UWL-H100 28M67 Type1, cap bolts and hex wrench. The set is used to replace with worn original lens mount or to change from Type2 to Type1.
*Depending on usage of lens, you may find it difficult to remove the original lens mount due to anchoring by salt build-up. In such case, do not perform self-maintenance but consult your purchasing dealer for proper servicing.
M67 Screw Ring Set for UWL-H100 28M67 Type2 [service part]
Set of a lens mount of the UWL-H100 28M67 Type2, cap bolts and hex wrench. The set is used to replace with worn original lens mount or to change from Type1 to Type2.
*Depending on usage of lens, you may find it difficult to remove the original lens mount due to anchoring by salt build-up. In such case, do not perform self-maintenance but consult your purchasing dealer for proper servicing.