LF800-N
[Discontinued]
[Standard Accessory]
Hand strap
INON grease
Powerful Spotlight Aims Pinpoint
Narrow 5°Beam Water-Proof Light
Maximum 800 lumen and 5 degree coverage. Unique optical system effectively condenses spread beam generated by the LED chip to produce super narrow beam with sharp-cut. In addition to general use on land or dive light underwater, this product is best suited as a pointer for a dive guide, searchlight in poor visibility or powerful constant lighting source for photography/videography.
Simple yet durable rotary switch provides two power settings for various scenes; FULL with maximum intensity 800 lumen or LOW with 300 lumen for longer burn time and usable on land as well (*). The rotary switch is equipped with Lock Ring to prevent accidental operation when the product is not in use.
(*) Only LOW mode is usable on land. FULL mode is not usable on land except for brief function check.
Optionally available "Color Filter LF-N Set" consists of "Red Filter LF-N" which changes color not to stimulate marine lives and "Blue Filter LF-N" which calibrates native light to deliver ideal color tone for underwater imaging.
(*) "Color Filter LF-N Set" is designed for underwater use only and not usable on land.
Lockable ON/OFF and two power setting switch
Optionally available "Condenser Lens LF-N" functions to condense native narrow light further to have closer usable range with smaller illuminated area. Unlike using a snoot which shaves light, the "Condenser Lens LF-N" uses optics to condense native beam to make it even stronger and brighter.
(*) "Condenser Lens LF-N" is designed for underwater use only and not usable on land.
3 x AA operated yet compact and handy flashlight thanks to its parallel loading battery pack.
Ideal lighting device for aiming or underwater imaging thanks to carefully selected white LED chip producing quality light with enhanced color reproducibility and color temperature 5000K.
Operated by easily obtainable 3 x AA batteries. Using compatible rechargeable batteries like "eneloop" or "eneloop pro" enables you to share same battery charger with an INON strobe to enhance mobility and minimize your luggage space. The rated practical burn time (*) with "eneloop pro" (BK-3HCC) rechargeable batteries, is approx. 90 minutes at FULL mode or approx. 265minutes (4hrs 25 min) at LOW mode.
(*) Average time to get half brightness comparing to initial performance when using "eneloop pro" batteries (Model code: BK-3HCC).
Wide range of optional accessories is available to install on a camera or camcorder.
The light head and battery box is made from seawater-resistant aluminum alloy. Simple yet durable construction with double O-ring for moving parts supports depth rating 120m. The independent rotary switch part is equipped with a stopper to prevent accidental flooding due to over loosening.
Gold coating on electrical contacts of the light head and battery box provides maintenance free circumstances under normal usage.
Interchangeable Light Head design enables you to use "LF1300-EWf", "LF1100-W", "LF1000-S" Light Head benefitting for various applications and supports possible upgrade to future model as well.
3xAA battery cartridge
BEAM ANGLE
LF800-N Working Range
| Number of | Working distance | Working distance | Diameter of lit area | |
| Condenser Lens LF-N | [Min.] | [Max.] (*1) | [Min.] | |
| Air | Nil (Not usable on land) | approx. 22cm/8.66in | ∞ | approx. 6.5cm/2.56in |
| Underwater | Nil | approx. 30cm/11.8in | ∞ | approx. 7.0cm/2.76in |
| 1 | approx. 15cm/5.91in | ∞ (*2) | approx. 3.5cm/1.38in | |
| 2 | approx. 11cm/4.33in | approx. 32cm/12.6in | approx. 2.0cm/0.79in |
(*1) Theoretical working distance to illuminate a subject without significant center spot and not same as the maximum distance this product can deliver light.
(*2) When illuminating a subject at approx.55cm/21.6in away or greater, using Condenser Lens LF-N will have bigger lit area.
OPTIONS
SPECIFICATION (*1)
| LED Components | High-intensity power LED (Cree XM-L2"T6") |
| Max. Luminouus Flux(*2)(*3) | Full mode: approx. 800 lumen[“eneloop pro” battery] |
| Low mode: approx. 300 lumen[“eneloop pro” battery] | |
| Beam Angle | approx. 5° |
| Color Temperature(*3) | approx. 5000K |
| Usable Environment | underwater / air |
| Run Time[air](*4)(*6) | approx. 65 minutes ["eneloop" battery at Full] |
| approx. 215 minutes ["eneloop" battery at Low] | |
| approx. 85 minutes ["eneloop pro" battery at Full] | |
| approx. 265 minutes ["eneloop pro" battery at Low] | |
| approx. 70 minutes [Alkaline battery at Full] | |
| approx. 215 minutes [Alkaline battery at Low] | |
| Run Time[underwater](*5)(*6) | approx. 70 minutes ["eneloop" battery at Full] |
| approx. 215 minutes ["eneloop" battery at Low] | |
| approx. 90 minutes ["eneloop pro" battery at Full] | |
| approx. 265 minutes ["eneloop pro" battery at Low] | |
| approx. 75 minutes [Alkaline battery at Full] | |
| approx. 215 minutes [Alkaline battery at Low] | |
| Compatible Battery | AA"eneloop"/"eneloop pro" battery x 3 (*7) |
| AA NiMH [good quality] x 3 (*8) | |
| AA Alkaline battery x 3 | |
| Depth Rating | 120m / 394ft (*9) |
| Working Rangea(*11) | approx. 22cm / 8.66in – ∞ [air] |
| approx. 30cm / 11.8in – ∞[Underwater, with/without a filter and without a condenser lens] | |
| approx. 15cm / 5.91in – ∞[Underwater, with one condenser lens] | |
| approx. 11cm / 4.33in – 32cm / 12.6in[Underwater, with two condenser lenses] | |
| Size | Max. diameter 60.6mm / 2.4in |
| Length 144.6mm / 5.7in | |
| Weight (*10) | [air] 270.2g / 9.5oz |
| [underwater] approx. 134g / 4.7oz | |
| Working / Storage Temperature |
±0°C–+30°C / 32°F–86°F |
| LED Life Time | approx. 10,000 hours |
| Material/Finishing |
Corrosion resistant aluminum alloy / rigid almite, |
| PBT, PC, optical glass etc. | |
| Standard Accessory | Hand strap |
| INON grease | |
| EMC standards | EN 55015:2006 + A1:2007, |
| EN 61547:1995 + A1:2000 | |
| CRF 47 FCC Part 15 [incidental radiator] | |
| AS/NZS CISPER 15:2006 |
| (*1) | Subject to change without prior notice | ||||||||||||||||||||
| (*2) | Nominal value calculated from LED manufacture specification sheet. | ||||||||||||||||||||
| (*3) | Due to individual variability of LED, drive circuit or battery etc., luminous flux, color temperature or intensity may vary within rated specification. | ||||||||||||||||||||
| (*4) | Average time to get half brightness when continuously turn ON the product with below listed batteries on land (approx. 20°C / 68°F).
|
||||||||||||||||||||
| (*5) | Average time to get half brightness when continuously turn ON the product with below listed batteries on underwater (approx. 25°C / 77°F).
|
||||||||||||||||||||
| (*6) | Actual measured data by INON. The value may vary depending on product individual variability, battery manufacture/model, test condition. | ||||||||||||||||||||
| (*7) | "New generation" NiMH batteries carrying less self-discharging and heat generating characteristic comparing to "conventional" or "high-capacity" NiMH including batteries listed below have been confirmed compatible by INON INC. as same as recommended Panasonic "eneloop"/"eneloop pro" battery (BK-3MCC, BK-3HCC, BK-3HCD).
|
||||||||||||||||||||
| (*8) | Some ”conventional” or ”high-capacity” NiMH rechargeable batteries have significant self-discharge and heat-generating characteristic resulting difficulty to keep their performance during usage. We recommend using recommended batteries. | ||||||||||||||||||||
| (*9) | Without operating the ”switch”. INON has confirmed depth rating 70m/230ft including switch operation. | ||||||||||||||||||||
| (*10) | Including 3 x AA ”eneloop” batteries. | ||||||||||||||||||||
| (*11) | Theoretical working distance to illuminate a subject without significant center spot and not same as the maximum distance this product can deliver light. |
