LE700-W
Replaced by LE700-W Type2
[FRONT VIEW]
[Standard Accessory]
Red Filter LE / Pink Filter LE / Orange Filter LE
INON Grease
Enfolding a Subject with Flat & Wide Light
Photographic Quality Underwater Flashlight
●Ample features as primary lighting source for photography/videography with powerful 700 lumen and wide 75 degree coverage as well as diving light to illuminate wide area for cave or wreck diving.
●The LE700-W carries specially designed reflector to produce wide and even coverage with natural beam pattern where light is gently diffused around covered area. Standard accessories of the LE700-W include three "Filter LE" in red/pink/orange to change color tone to suit to combined camera, shooting condition and personal preference, which is ideal for photography and videography with its light quality.
●Wide range of optional accessories is available to install on a camera or camcorder.
●The LE700-W runs on easily obtainable 3 x AA size batteries. Practical burn time with eneloop pro rechargeable batteries is rated approx. 75 minutes(*). Using compatible rechargeable batteries like "eneloop" enables you to share same battery charger with an INON strobe to enhance mobility and minimize your luggage space.
* Average measured time underwater (approx. 25℃/77°F) to get half brightness when continuously turn ON the product.
●The light head and battery box is made from seawater-resistant aluminum alloy. Simple yet durable construction with double O-ring for moving parts supports depth rating 120m. The independent rotary switch part is equipped with a stopper to prevent accidental flooding due to over loosening and reliable ON/OFF operation.
●Gold coating on electrical contacts of the light head and battery box provides maintenance free circumstances under normal usage.
●Interchangeable Light Head design enable you to use "LE700-S", "LE550-W", "LE550-S", "LE350", "LE250" Light Head depending on usage and supports possible upgrading to future model as well.
BEAM ANGLE
ACCESSORIES
SPECIFICATION (*1)
LED Components | High-intensity Power LED (Cree XM-L"T6") | Depth Rating | 120m / 394ft (*9) |
Luminouus Flux (*2)(*3) |
700 lumen | Size | Max. diameter 33.7mm / 1.3in Length 193.6mm / 7.6in |
Coverage | 75° [without a filter, with packaged Red/Pink/Orange Filter LE] |
Weight (*10) | [air] 217.5g / 7.7oz, [underwater] approx. 131g / 4.6oz |
Color Temperature (*3) |
approx. 6,000K | Working / Storage Temperature |
±0°C–+30°C / 32°F–86°F |
Usable Environment | underwater | LED Life Time | approx. 10,000 hours |
Operable Duration (*5)(*6) |
approx. 60 minutes ["eneloop" battery] | Material / Finishing | Corrosion resistant aluminum alloy / rigid almite, PBT, Optical grass etc. |
approx. 75 minutes ["eneloop pro" battery] | |||
approx. 80 minutes [Alkaline battery] | Standard Accessory | Red Filter LE, Pink Filter LE, Orange Filter LE, Hand Strap INON Grease |
|
approx. 125 minutes [Lithium battery (1.5V)] | |||
Compatible Battery | AA "eneloop"/"eneloop pro" battery x 3 (*7) | ||
AA NiMH [good quality] x 3 (*8) | EMC standards | EN 55015:2006 + A1:2007 EN 61547:1995 + A1:2000 |
|
AA Alkaline battery x 3 | CRF 47 FCC Part 15 [incidental radiator] | ||
AA Lithium battery (1.5V) x 3 | AS/NZS CISPER 15:2006 |
(*1) Subject to change without prior notice
(*2) Nominal value calculated from LED manufacture specification sheet.
(*3) Due to individual variability of LED, drive circuit or battery etc., luminous flux, color temperature or intensity may vary within rated specification.
(*4) Average time to get half brightness when continuously turn ON the product with below listed batteries on land (approx. 20°C / 68°F).
- "eneloop" battery: SANYO "eneloop", HR-3UTGB, 1.2V, Min.1,900mAh
- "eneloop pro" battery: SANYO "eneloop pro", HR-3UWX, 1.2V, Min.2,400mAh
- Alkaline battery: Panasonic "EVOLTA" LR6(EJ), 1.5V
- Lithium battery (1.5V): Energizer e2 LITHIUM, FR6, 1.5V
(*5) Average time to get half brightness when continuously turn ON the product with below listed batteries on underwater (approx. 25°C / 77°F).
- "eneloop" battery: SANYO "eneloop", HR-3UTGB, 1.2V, Min.1,900mAh
- "eneloop pro" battery: SANYO "eneloop pro", HR-3UWX, 1.2V, Min.2,400mAh
- Alkaline battery: Panasonic "EVOLTA" LR6(EJ), 1.5V
- Lithium battery (1.5V): Energizer e2 LITHIUM, FR6, 1.5V
(*6) Actual measured data by INON. The value may vary depending on product individual variability, battery manufacture/model, test condition.
(*7) "New generation" NiMH batteries carrying less self-discharging and heat generating characteristic comparing to "conventional" or "high-capacity" NiMH including listed batteries as below confirmed compatible by INON INC. as same as recommended [Panasonic "eneloop"/"eneloop pro" battery (BK-3MCC, BK-3HCC, BK-3HCD)].
- Panasonic Corporation
Model name: eneloop [recommended]/Model code: BK-3MCC
- Panasonic Corporation
Model name: eneloop pro [recommended]/Model code: BK-3HCC, BK-3HCD
- SANYO Electric Co.,Ltd
Model name: eneloop [recommended]/Model code: HR-3UTG, HR-3UTGA, HR-3UTGB
- SANYO Electric Co.,Ltd
Model name: eneloop pro [recommended]/Model code: HR-3UWX
- Sony Corp.
Model name: Cycle Energy Blue/Model code: NH-AA-2BKA, NH-AA-4BKA
- Panasonic Corporation
Model name: Rechargeable Ni-MH (AA)/Model code: HHR-3MPS
- Maha Energy Corporation
Model name: IMEDION/Model code: MHRAAI4
- GP Batteries International Ltd
Model name: ReCyko+/Model code: 210AAHCBE
- ANSMANN AG
Model name: maxE/Model code: 5030991, 5030992, 5035052
- Electrochem Automation Inc.
Model name: NEXcell energyON/Model code: n/a (AA 2000mAh)
(*8) Some "conventional" or "high-capacity" NiMH rechargeable batteries have significant self-discharge and heat-generating characteristic resulting difficulty to keep their performance during usage. We recommend using recommended batteries.
(*9) Without operating the "Switch". INON has confirmed depth rating 84m/276' including switch operation.
(*10) Including 3 x AA "eneloop" batteries.