The Canon EOS 6D is Canon’s most compact full-frame digital SLR delivering incredible image quality with many of advanced features including newly designed 20.2 Megapixel Full-Frame CMOS sensor.
The INON X-2 for EOS6D housing is built on the concept of "Professional and Lightweight" for professional image quality, high mobility underwater and superb cost effectiveness in compact and lightweight body. Buttons and levers on the housing are carefully located as much as like camera's control itself for intuitive operation underwater. You never miss shooting opportunity. INON offers an underwater camera system in total with strobe, viewfinder, MRS Port, LED flashlight and wide range of arm products all from INON for fast and smooth underwater photography/videography.

The X-2 for EOS6D is made from corrosion resistance aluminum alloy by ultraprecise cast manufacturing technique to fuse design, weight and durability in higher dimension. The cast manufacturing technique enables thin body plate with complicated curved design which is not possible with machining. Lightweight and durable aluminum alloy body has acquired reliability, durability and controllability even in severe underwater.

Cast manufacturing allows flexible design to put various ingenuities for trouble-free underwater operation as like controlling camera on land, where your right thumb and mid finger securely hold a housing without effort, index finger can naturally access to the shutter release lever and aperture or shutter speed can be easily adjusted without seeing those dials during checking composition through the viewfinder. The INON X-2 for EOS6D pursues intimate controllability to "capture the moment” in addition to accessibility to all necessary controls/dials for underwater photography/videography.
 
* [Quick Control button], [Multi-controller], and [Multi function lock switch] are not accessible.

Buttons, dial levers are not directly attached on the aluminum alloy housing body but installed via brass bearings to prevent the aluminum housing body from galling caused by sliding of buttons and movement of dial levers to secure waterproof property. Only minimum parts replacement can refresh these controls even you need to change bearings. Buttons and dial levers carry oil bearing type INON yellow O-Rings to prevent accidental flooding due to lack of grease. Also their size is thicker than required to enhance waterproof property.

Equipped with a built-in circuit to convert sync signal transmitted from camera’s hot shoe to optical signal. The unit triggers an external strobe by LEDs underneath of the Optical D Connector. Flooding-free fiber optics connection is supported to benefit simple yet reliable external strobe shooting simply by plug-in "Optical D Cable Type L". Different length of Optical D Cable products like "Optical D Cable L Type L (68cm/27in)" or "Optical D Cable LL Type L (110cm/43in)" expand application of strobe shooting such as "off-camera strobe shooting".

The Optical Flash Trigger converts electrical strobe trigger signal from camera hot-shoe into LED flash (once) but does not support TTL Auto exposure or pre-flash system. Compatible flash mode of an external strobe is [External Auto] and [Manual]. When using INON Z-240, D-2000 series, S-2000 or D-180 series, it is necessary to deactivate Advanced Cancel Circuit (push and lock the switch/insert the magnet) to accommodate with non pre-flash type camera.

The housing body is coated with corrosion-resistance and wear-resistant material.
The corrosion suppression unit attached on the bottom of the housing is made from zinc preventing the housing from galvanic corrosion as the unit oxidizes before the housing.

The housing offers a leak sensor circuit as standard feature to warn you with red LED and buzzer in case of accidental flooding.

INON offers four different finder units; [Finder Window], [Pick-up Finder 3], [45°Viewfinder], [Straight Viewfinder] to accommodate with various subjects/shooting conditions as like selecting camera lens.