INON

Strobe Dome Filter SOFT

JAN code : 4562121438651

Strobe Dome Filter SOFT
The Strobe Dome Filter SOFT installed on the Z-330.
This filter does not widen strobe beam angle and cut strobe output at "approx.0.3EV." underwater. Attach this filter when you prefer soft flash light" or want to protect front dome of the strobe.
 
[Compatible Strobe]
Z-330, D-200 (packaged in the Z-330/D-200)
 
[Effect on strobe power]
-0.3 EV.
Strobe Dome Filter SOFT
 
The Strobe Dome Filter SOFT installed on the Z-330.
 

This filter does not widen strobe beam angle and cut strobe output at "approx.0.3EV." underwater. Attach this filter when you prefer soft flash light" or want to protect front dome of the strobe.
 
[Compatible Strobe]
Z-330, D-200 (packaged in the Z-330/D-200)
 
[Effect on strobe power]
-0.3 EV.

Strobe Dome Filter ND

JAN code : 4562121438620

Strobe Dome Filter ND
The Strobe Dome Filter ND installed on the Z-330.
An ND filter to step down strobe output at -4EV.
 
[Compatible Strobe]
Z-330, D-200
 
[Effect on strobe power]
-4 EV.
Strobe Dome Filter ND
 
The Strobe Dome Filter ND installed on the Z-330.
 

An ND filter to step down strobe output at -4EV.
 
[Compatible Strobe]
Z-330, D-200
 
[Effect on strobe power]
-4 EV.

Strobe Dome Filter [4900K]

JAN code : 4562121438637

Strobe Dome Filter [4900K]
The Strobe Dome Filter [4900K] installed on the Z-330.
A color filter to warm native color temperature to 4900K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4900K can have richer blue water back ground with natural color subject illuminated by a strobe.
 
[Compatible Strobe]
Z-330, D-200
 
[Color temperature]
4900K
 
Strobe Dome Filter [4900K]
 
The Strobe Dome Filter [4900K] installed on the Z-330.
 

A color filter to warm native color temperature to 4900K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4900K can have richer blue water back ground with natural color subject illuminated by a strobe.
 
[Compatible Strobe]
Z-330, D-200
 
[Color temperature]
4900K
 

Strobe Dome Filter [4600K]

JAN code : 4562121438644

Strobe Dome Filter [4600K]
The Strobe Dome Filter [4600K] installed on the Z-330.
A color filter to warm native color temperature to 4600K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4600K can have richer blue water back ground with natural color subject illuminated by a strobe.
 
[Compatible Strobe]
Z-330, D-200
 
[Color temperature]
4600K
Strobe Dome Filter [4600K]
 
The Strobe Dome Filter [4600K] installed on the Z-330.
 

A color filter to warm native color temperature to 4600K. Warming strobe light is useful to capture diver's skin more healthy or accentuate warm color subject. Also converting RAW files at 4600K can have richer blue water back ground with natural color subject illuminated by a strobe.
 
[Compatible Strobe]
Z-330, D-200
 
[Color temperature]
4600K

page top

Snoot Set for Z-330/D-200

JAN code : 4562121438996

Snoot Set for Z-240/D-2000

The INON Snoot Set for Z-330/D-200 is an accessory for the INON "Z-330", "D-200" to change beam angle. The various combination of packaged parts supports 7 different beam coverage with the following sophisticated effects [To block extra diffused light eliminating backscatter] / [To highlight a subject by illuminating the subject only ] / [To give a spotlight effect on a subject etc.]
The Rubber Hood is securely attached on a compatible strobe via supplied dedicated aluminum sleeve which is screwed on the Strobe Light Shade mount screw on the strobe.

page top

Wireless Connection Kit

JAN code : 4562121434240

Wireless Connection Kit

Optional kit to use [Wireless Connection]. This package includes Mirror Units (strobe) and Camera Mirror, stickers to reliably transmit built-in flash light to the strobe in S-TTL Auto mode.
 
*This Wireless connector kit is included in the S-2000 strobe package. But it is sold separately from the Z-330 strobe, D-200 strobe, Z-240 Type4 strobe and the D-2000 Type4 strobe.

page top

Optical D cable Type L / Cap Set

Optical D cable Type L / Cap Set

INON [Optical D Cable Type L / Cap Set] is a key component to reliably trigger an external strobe in synch with built-in flash light.
 
*Use correct Optical D Cable exclusively designed for each camera system.

Optical D Cable Type L

Optical D Cable Type L

INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.

Optical D Cable Type L Rubber Bush-M11 Adapter Set

JAN code : 4562121437234

Optical D Cable L Type L Rubber Bush-M11 Adapter Set

JAN code : 4562121437241

Optical D Slave Cable Type L

A fiber optics kit to connect a strobe on a screw mount type fiber optics adapter with thread size M11/P1.0 which is used for INON X1-LZ/X1-NZ/X1-Z housings and Optical Converter D/TTL. Two different length products are available; Optical D Cable Type L (free length approx. 43cm/17in) and Optical D Cable L Type L (free length approx. 68cm/27in).

Double Optical D Cable Type L Rubber Bush-M11 Adapter Set

JAN code : 4562121437258

Double Optical D Cable L Type L Rubber Bush-M11 Adapter Set

JAN code : 4562121437265

Double Optical D Cable Type L Rubber Bush-M11 Adapter Set

A fiber optics kit to connect two strobes on screw mount type fiber optics adapter with thread size of M11/P1.0 which is used for INON X1-LZ/X1-NZ/X1-Z housings and Optical Converter D/TTL. Two different length products are available; two of Optical D Cable Type L (free length approx. 43cm/17in) and two of Optical D Cable L Type L (free length approx. 68cm/27in).

TTL Optical Slave Cable S Type L

JAN code : 4562121434363

TTL Optical Slave Cable L Type L

JAN code : 4562121434370

TTL Optical Slave Cable

An optical slave cable exclusively used for slave connection between Z-330 or TTL strobe with TTL Sensor, and compatible strobes from other manufacturers or master strobes, such as INON Z-22.
 
S: Compatible master strobe
Nikon SB‐105, Sea&Sea YS60TTL, YS90TTL Duo, YS120TTL Duo
 
L: Compatible master strobe
INON Z-22, Nikon SB-104, Sea&Sea YS350TTL/Pro, YS300TTL/S

page top

Z Adapter MV

JAN code : 4562121436527

Z Adapter MV

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.

Z Adapter II

JAN code : 4562121437418

Z Adapter II

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.

page top

Direct Base III

JAN code : 4562121436541

Direct Base III

A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.

page top

Z Joint

JAN code : 4562121433571

Z Joint

"Z Joint" is attached on [YS Adapter compatible arm] including "Grip Base D4" / "Shoe Base" etc. to set up compact strobe system and equipping with "YS Adapter" enables to attach on various strobe arms as like "Z Adapter".

page top

Quick Holder Set S-Z

JAN code : 4562121439412

クイックホルダーセットS-Z

A set of Quick Holder Z and Quick Base S to use INON quick release system for INON Z-330, D-200, S-2000, Z-240, D-2000 strobes.

page top

Strobe Light Holder LE

JAN code : 4562121435568

Strobe Light Holder LE

Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV"is necessary to use this product.

Strobe Light Holder LF

JAN code : 4562121437715

Strobe Light Holder LE

Optional product to attach one or two INON LF series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "Z-240" or "D-2000" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II"is necessary to use this product.

page top

Shoe Base M6

JAN code : 4562121438477

Shoe Base M6

A Shoe Base installing a strobe on an accessory show of an underwater housing.

page top

Grip Base D4 set

[Discontinued]

Grip Base D4 set

A multi-purpose product to provide strobe arm function to hold compatible INON external strobe, a base-stay function to connect compatible housing / protector and a strobe arm, and grip / holder function to hold a whole system.

page top

Front Cover 110

JAN code : 4562121438989

フロントカバーφ110
 

A cover to protect front dome lens of INON Z-330 / D-200 strobe.  Designed to fit to the strobe with “Strobe Light Shade” being attached.  Usable underwater as the cover is made of neoprene as same as wetsuits.  Also usable for an INON wide lens attached with a lens hood.
 

set-up image

set-up image

フロントカバーφ110
 
set-up image

set-up image

 

A cover to protect front dome lens of INON Z-330 / D-200 strobe.  Designed to fit to the strobe with “Strobe Light Shade” being attached.  Usable underwater as the cover is made of neoprene as same as wetsuits.  Also usable for an INON wide lens attached with a lens hood.

 

Strobe Cover D/Z

JAN code : 4562121433861

click to enlarge

A strobe cover made from neoprene as same as wet-suits for underwater use. This cover protects strobe from accidental damage during diving as well as transportation by its cushioned material. Two slits on both sides are designed for effective radiation.

page top

Spare O-ring Set (Battery Box and Synch Connector Cap)

Spare O-ring Set

Replacement O-Ring for the Z-330/Z-240.
INON yellow O-Rings contain lubricant in the O-Ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-Ring.

INON Grease

INON Grease

Special grease formulated to match INON yellow O-Rings. Can also be used with conventional black O-Rings.

page top