INON

■Diffuser for S-2000

-0.5 Blue Difuser for S-2000

Attaching this diffusers to S-2000 increases beam angle [105°x95°] to [110°x110°circular], and makes quality of light and shadows soften.
"Blue" Diffuser compensate / ease yellowish / reddish compensation characteristic mainly by Canon digital camera.

■Snoot Set for S-2000

Snoot Set for S-2000

The INON "Snoot Set for S-2000" is an accessory for the INON "S-2000" to change beam angle. The various combination of packaged parts supports 6 different beam coverage with the following sophisticated effects [To block extra diffused light eliminating backscatter.] / [To highlight a subject by illuminating the subject only.] / [To give a spotlight effect on a subject etc.]

■Wireless Connection Kit

Wireless Connection Kit

Optional kit to use "Wireless Connection". This package includes Mirror Units (strobe) and Camera Mirror, stickers to reliably transmit built-in flash light to the S-2000 in S-TTL Auto mode.

*This Wireless connector kit is included in the S-2000 strobe package. But it is sold separately from the Z-330 strobe, D-200 strobe, Z-240 Type4 strobe and the D-2000 Type4 strobe.

■Optical D Cable Type L / Cap Set

Optical D Cable Type L / Cap Set

INON "Optical D Cable Type L / Cap Set" is a key component to reliably trigger an external strobe in synch with built-in flash light.

*Use correct Optical D Cable exclusively designed for each camera system.

■Optical D Cable Type L

Optical D Cable Type L

INON optical cable products use multicore optical fiber cable made from more than 200 fibers providing super durability and rigid reliability with minimum bending curvature 2mm which is quite different from single core optical fiber cable.

■Optical D Slave Cable III Type L

Optical D Slave Cable III Type L

Dedicated Optical D Slave cable to connect the S-2000 and compatible strobe in [Optical D Slave Cable Connection].

■Optical D Cable Type L Rubber Bush-M11 Adapter Set
■Optical D Cable L Type L Rubber Bush-M11 Adapter Set

Optical D Cable Type L Rubber Bush-M11 Adapter Set

A fiber optics kit to connect a strobe on a screw mount type fiber optics adapter with thread size M11/P1.0 which is used for INON X1-LZ/X1-NZ/X1-Z housings and Optical Converter D/TTL. Two different length products are available; Optical D Cable Type L (free length approx. 43cm/17in) and Optical D Cable L Type L (free length approx. 68cm/27in).

■Double Optical D Cable Type L Rubber Bush-M11 Adapter Set
■Double Optical D Cable L Type L Rubber Bush-M11 Adapter Set

Double Optical D Cable Type L Rubber Bush-M11 Adapter Set

A fiber optics kit to connect two strobes on screw mount type fiber optics adapter with thread size of M11/P1.0 which is used for INON X1-LZ/X1-NZ/X1-Z housings and Optical Converter D/TTL. Two different length products are available; two of Optical D Cable Type L (free length approx. 43cm/17in) and two of Optical D Cable L Type L (free length approx. 68cm/27in).

page top

■Z Adapter MV

Z Adapter MV

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. The ball-joint is made from plastic to provide flexible strobe positioning without loosening a clamp to provide enormously comfortable strobe aiming.

■Z Adapter II

Z Adapter II

An adapter to attach INON "Z-330", "D-200", "S-2000", "Z-240", "D-2000", "Z-220" or "D-180" series strobe on an arm body or Direct Base III etc. via Clamp III. Metal body enhances stability of combined arm.

■Direct Base III

Direct Base III

A base adapter with aluminum alloy ball-joint. Attached on top edge of the Grip Base D4 to connect Arm Body or Z Adapter MV, or on an INON strobe as strobe adapter to lock strobe position securely by a clamp.

■Strobe Light Holder LE

Strobe Light holder LE

Optional product to attach one or two INON LE series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter MV"is necessary to use this product.

■Strobe Light Holder LF

Strobe Light Holder LE

Optional product to attach one or two INON LF series LED flashlight on compatible lighting arm together with INON "Z-330", "D-200", "S-2000", "D-2000" or "Z-240" etc. providing flexible lighting source selection. Usable as lighting arm to hold LE series LED flashlight only as well. Optional "Z Joint" or "Z Adapter II"is necessary to use this product.

■Z Joint

Z Joint

"Z Joint" is attached on [YS Adapter compatible arm] including "Grip Base D4" / "Shoe Base" etc. to set up compact strobe system and equipping with "YS Adapter"enables to attach on various strobe arms as like "Z-Adapter".

■Shoe Base M6

Shoe Base M6

A Shoe Base installing a strobe on an accessory show of an underwater housing.

■Grip Base D4 Set

Grip Base D4 Set

A multi-purpose product to provide strobe arm function to hold compatible INON external strobe, a base-stay function to connect compatible housing / protector and a strobe arm, and grip / holder function to hold a whole system.

■Battery Box O-ring

Spare O-ring

Replacement O-Ring for the S-2000/D-200/D-2000.
INON yellow O-Rings contain lubricant in the O-Ring rubber. Yellow color for best contrast, so contaminants etc. are easier to see, and so it is harder to forget to install the O-Ring.

■INON Grease

INON Grease

Special grease formulated to match INON yellow O-Rings. Can also be used with conventional black O-Rings.

page top