INON

■X-2 Lanyard Plate

X-2 Lanyard Plate
Set-up image

Set-up image

Set-up image

Set-up image


Attaching this plate on INON X-2 for EOS6D, X-2 for EOS70D or X-2 for EOS80D housing utilizes to use commercially available lanyard (carry belt).
The plate is attached on the "Base Adapter Fixing Screw Hole (M6)" of the compatible housing by screws or by compatible INON arm adapter.
Supplied rubber grommet prevents uncomfortable clinking noise between this product and metal hook from recording when shooting video as well as scratching the housing body.
 
■Weight: 52g (1.8oz) [air] / approx.42g (1.5oz) [underwater]
 
■Compatible [X-2] series Housing (*1)
X-2 for EOS6D, X-2 for EOS70D, X-2 for EOS80D
 
■Compatible arm system products (*2)
Multi Direct Base IIa
Multi Direct Base II WB
Multi Direct Base II Long
Shoe Base Adapter X-2 + Shoe Base
M6 Plate Direct Base III+ Direct Base III
M6 Plate Direct Base III+ Direct Base YS RT
 
(*1) It is possible to attach this product to X-2 for EOS10D, X-2 for EOS20D, X-2 for EOS30D, X-2 for EOS50D/40D or X-2 for EOS60D but it requires to remove pre-installed "Lanyard hook". Please consult with your purchasing dealer. Not compatible with an INON housing which has done "Sync Connector Installation".
(*2) Attaching "ClampⅢ", "Z Joint" or "Light Holder products" may interfere full movement of the lanyard.

A spring snap hook installed on the X-2 Lanyard Plate (with grommet)

A spring snap hook installed on the X-2 Lanyard Plate (with grommet)

A split ring installed on the X-2 Lanyard Plate

A split ring installed on the X-2 Lanyard Plate

A carrying rope attached on the X-2 Lanyard Plate

Optical D Cable Type L

Fiber optics products to connect the X-2 housing and compatible strobe via Double Optical D Connector. Four different length to choose; "Optical D Cable Type L" with free length approx. 43cm / 17in, "Optical D Cable L Type L" with free length approx. 68cm / 27in, "Optical D Cable SS Type L" with free length approx. 24cm / 9in, and "Optical D Cable LL Type L" with free length approx. 110cm / 43in.
 
 

■X-2 Holder III Spacer

JAN code: 4562121439191

X-2 Holder II Spacer
A spacer designed to attach the Holder III directly on the right side of the INON X-2 housing to benefit with less weight if left hand grip is not required. INON Arm System is directly attachable on the top end of the Holder III.
 
Weight: 48g (1.7oz) [air] / approx.31g (1.1oz) [underwater] *standalone
236g (8.3oz) [air] / approx.79g (2.8oz)  *with Holder III
Set-up image

Set-up image

■X-2 Holder II Spacer

JAN code: 4562121435346

click to enlarge
A spacer designed to attach the Holder II directly on the right side of the INON X-2 housing to benefit with less weight if left hand grip is not required. INON Arm System is directly attachable on the top end of the Holder II.
 
■Weight: 34g (1.2oz) [air] / approx.21g (0.7oz) [underwater] *standalone
159g (5.6oz) [air] / approx.13g (0.5oz) [under surface] *with Holder II
Set-up image

Set-up image

■Holder II

JAN code: 4562121431126

Holder II

The Holder II comfortably supports the back of your right hand when holding a housing or Nikonos V. INON strobe arm system is directly attached on the Holder II.
 
■Weight: 125g (4.4oz) [air] / approx.-8g (-0.3oz) [under surface]

■Holder II Grip Set

[Discontinued]

Holder II Grip Set

A base stay with grip for a SLR housing to attach a strobe etc. The Holder II Grip Set is firmly attached on a housing by two tripod screws. The padded Holder supports back of right hand which holds the housing directly and the Grip on the left is designed to access to focus/zoom dial by left fingers with holding it. Both of them are adjustable to accommodate to a variety of hand sizes.
 
■Weight: 410g (14.5oz) [air] / approx.196g (6.9oz) [below the surface]

■Shoe Base Adapter X-2

click to enlarge
 
click to enlarge

Set-up image


An adapter to attach the Shoe Base on top of the X-2 series housing enabling to hold Z-330/D-200/S-2000/Z-240/D-2000 strobe or LE series LED flashlight combined with Z Joint or Light Holder product.
 
■Weight: 10g (0.4oz) [air] / approx.6g (0.2oz) [underwater]
 
■Compatible [X-2] series Housing
X-2 for EOS10D, X-2 for EOS10D BK, X-2 for EOS20D, X-2 for EOS20D BK
X-2 for EOS20D BK(TM), X-2 for EOS30D BK(TM), X-2 for EOS50D/40D
X-2 for EOS60D, X-2 for EOS70D, X-2 for EOS6D, X-2 for EOS80D
 
■Compatible arm system products
Grip+Bar III Set, Holder II Grip Set, Holder Base, Grip Bar Set, Grip Bar II Set
 
*The thumbscrew of the "Z Joint" or "Light Holder" could possibly obstruct free movement of an Optical D Cable product or electrical cable attached on X-2 housing series.

■MF Rear Port Cap

MF Rear Port Cap
Set-up image

Set-up image

A rear cap for a port (except for Front Port) and Extension Ring. When transporting or during storage, this cap protects O-ring and screw mount. The cap is designed to equalize with ambient pressure when transporting in an aircraft.

■Housing Body Cap

Housing Body Cap
Set-up image

Set-up image

A cap for port mount of a housing to protect O-ring contact surface. The cap is designed to equalize with ambient pressure when transporting in an aircraft.

■X-2 Main O-ring 195 for 80D

Main O-Ring for X-2 Housing Body

Spare oil-bearing INON yellow O-Ring for housing body.
 
■Comaptible Housing
X-2 for EOS80D

■O-ring for Port / Extension Ring

O-Ring for Port / Extension Ring

Spare oil-bearing INON yellow O-Ring for port or Extension Ring.
 
■Compatible Port / Extension Ring
Dome Port 2, MRS60 Port II, MRS60 Port, MRS100 Port Type UIII,
MRS100 Port Type UII, MRS100 Port Type S, MF Wide Port, MF Flat Port,
MF Standard Port 2
Dome Port 115, Pancake Port, MRS Base Port
Extension Ring S, Extension Ring M, Extension Ring L, Extension Ring 18, Extension Ring 36, Extension Ring 58, Extension Ring 81, MF EXT. Ring M

■INON Grease

INON Grease

Grease exclusively for oil bearing INON yellow O-Ring.

■Straight Viewfinder Unit II for X-2

 JAN:4562121439207

STVF Unit II for X-2
  
Simulated viewfinder image through Straight Viewfinder Unit II for X-2

Simulated viewfinder image through Straight Viewfinder Unit II for X-2

 
Compact and lightweight straight type viewfinder supporting full frame DSLR.
Using a large prism to minimize light attenuation makes it possible to see every corner of camera’s viewfinder image clearer and brighter despite of eye position.
Unlike conventional viewfinders, this bright viewfinder enables you to focus precisely and comfortably even in dark underwater.
Optically designed to suit to an EVF: electrical viewfinder of a DSLR camera which provides wider viewing angle, so no vignetting nor blur even in corners.
Magnification of this viewfinder is same as camera’s viewfinder. As its eye-point underwater is extended to 60mm/2.4inch, no vignetting of viewfinder image even through a mask.
Viewfinder body is made from corrosion resistant aluminum and FRP: fiber reinforced plastic to make the body compact, lightweight yet durable.
 
■Weight: 305g (10.7oz) [air]

OPTION

■Diopter Correction Lens [+1.5D] for STVF-II

 JAN:4562121439221

Diopter Correction Lens [+1.5D] for STVF-II

Optional accessory for Straight Viewfinder Unit II for X-2.
Add-on correction lens to shift +1.5 diopter for those who are unable to adjust with camera’s viewfinder diopter adjustment range due to long sight or presbyopia.
The Diopter Correction Lens is to be installed before diving by drop it inside of the Straight Viewfinder Unit II from housing side and tighten it by packaged tool (not changeable underwater).
 
Weight: 2g (0.07oz) [air]

---Tips of diopter adjustment ---
Under bright circumstance on land, human eye’s pupil shrinks making diopter adjustment easy as depth of field is deep while the adjusted viewfinder may not get perfect focus and hard to see viewfinder image when the pupil gets open in dark underwater as the depth of field gets shallow especially with presbyopic eyes due to deteriorated focusing function (Though it varies among different individuals or age, it takes about 15 minutes to open pupils by dark adaption when we get dark underwater).
 
So it would be recommended to conduct diopter adjustment in a dark room after staying there 15 minutes when pupils open as like underwater enabling to get perfect focus of viewfinder image even underwater where pupils will open.

■45º View Finder Unit for X-2

click to enlarge
 
45°View Finder Unit for X-2

Simulated viewfinder image (X-2 for EOS70D)

The 45º Viewfinder is an interchangeable finder unit to extend eye-point of camera's viewfinder without changing image size (x1.0) to see all finder image area even through a mask without vignetting. The eye piece is at 45 degree angle to camera's optical axis which helps to shoot lower subject like a goby on seabed. Also the eye piece is 360 degree rotatable making it easy to shoot vertical composition from low angle.
 
*The Lock Ring Tool for X-2 Housing and Finder Unit Fixing Screw Ring is not included.
 
■Weight: 337g (11.9oz) [air]

■Straight View Finder Unit for X-2

[Discontinued]

click to enlarge

 

Straight View Finder Unit for X-2

Simulated viewfinder image (X-2 for EOS70D)

The Straight Viewfinder is an interchangeable finder unit to extend eyepoint of camera's viewfinder without changing image size (x1.0) to see all finder image area even through a mask without vignetting.
The eye piece is level to camera's optical axis to position camera/housing closer to a subject without changing your position.
 
*The Lock Ring Tool for X-2 Housing and Finder Unit Fixing Screw Ring is not included.
 
■Weight: 277g (9.8oz) [air]

■Pick-up Finder Unit 2 for X-2

click to enlarge

 

Pick-up Finder Unit for X-2

Simulated viewfinder image (X-2 for EOS70D)

The Pick-up Finder is a compact interchangeable finder unit to extend eyepoint and scale down image size (x0.75) to practically suppress vignetting to check composition even through a mask.
Previous "Pick-up Finder Unit for X-2" is not usable for EOS 70D but possible to use in combination with optional "Pick-up Finder Unit 2 (camera side module)".
 
*The Lock Ring Tool for X-2 Housing and Finder Unit Fixing Screw Ring is not included.
 
■Weight: 34g (1.2oz) [air]

■Finder Window Unit for X-2

click to enlarge

 

Finder Window

Simulated viewfinder image (X-2 for EOS70D)

The Finder Window is most inexpensive interchangeable finder unit which consists of single waterproof window made of optical glass to access camera's finder. This unit does not have carry optical function like extending camera's eyepoint so only center part of camera's finder is visible through a mask.
 
*The Lock Ring Tool for X-2 Housing and Finder Unit Fixing Screw Ring is not included.
 
■Weight: 27g (1.0oz) [air]

■Lock Ring Tool for X-2 Housing

Lock Ring Tool for X-2 Housing

Dedicated tool (same as packaged tool) to use when installing / removing a viewfinder unit.
 
*The Lock Ring Tool for X-2 Housing does not come with a viewfinder when purchasing the viewfinder standalone.

■Finder Unit Fixing Screw Ring [service part]

Finder Unit Fixing Screw Ring

Dedicated nut to fix a finder unit on a housing. (same as packaged screw ring)
 
*The Finder Unit Fixing Screw Ring comes with an X-2 housing but does not come with a viewfinder when purchasing the viewfinder standalone.

■Corrosion Suppression Unit

Corrosion Suppression Unit

Optional replacement unit when pre-installed unit gets worn. The unit suppresses housing corrosion by oxidizing before the X-2 housing body gets rusted.